Yeastar Technology NeoGate TA410, User Manual

Page: 42 / 55

TA410/810 User Manual
Table 4-7 Description of SIP General Settings
Items Description
UDP Port Port used for SIP registrations.The defaultis 5060.
Enable Random Port Enable or Disable Random SIP port.
Random Port Update
Interval
Set the Random Port Update Interval.
TCP Port Port used for SIP registrations. The default is 5060.
TLS Port Port used for SIP registrations. The default is 5061.
TLS Verify Server
When using TA
410/810 as a TLS client, whether or not to
verify server’s certificate. It is “No” by default.
TLS Verify Client
When using TA
410/810 as a TLS server, whether or not to
verify client’s certificate. It is “No” by default.
TLS Ignore Common
Name
Set this parameter as “No”, then common name must be
the same with IP or domain name.
TLS Client Method
When using TA
410/810 as TLS client, specify the protocol
for outbound TLS connections. You can select it as tlsv1,
sslv2 or sslv3.
RTP Port Start Beginning of the RTP port range.
RTP Port End End of the RTP port range.
DTMF Mode
Set the default mode for sending DTMF.Default setting:
rfc2833
Max
Registration/Subscription
Time
Maximum duration (in seconds) of a SIP registration. The
default is 3600 seconds.
Min
Registration/Subscription
Time
Minimum duration (in seconds) of a SIP registration. The
default is 60 seconds.
Default
Incoming/Outgoing
Registration Time
Default Incoming/Outgoing Registration Time: the default
duration (in seconds) of incoming/outgoing registration.
Register Attempts
The number of SIP REGISTER messages to send to a
SIP Registrar before giving up. The default is 0 (no limit).
Register Timeout
Number of seconds to wait for a response from a SIP
Registrar before classifying the register has timed out.
The default is 20 seconds.
Calling Channel Codec
Priority
Once enabled, when dialing out via SIP/SPS trunks, the
codec of calling channel will be selected preferentially. If
not, TA410/810 will follow the priority order in your
SIP/SPS trunks.
Video Support Support SIP video or no. The default is yes.
Max Bit Rate
Configure the max bit rate for video stream. The default:
384kb/s.
DNS SRV Look Up
Please enable this option when your SIP trunk contains
more than one IP address.
42/55