N412 Administrator Manual
26
Password
The password for this extension.
Caller ID
The Caller ID will be used when this user calls another internal
extension.
Enable Voicemail
Enable voicemail for the user.
Voicemail Access
PIN
The voicemail password (digits only) for the user to access the
voicemail box.
Enable Send
Voicemail
Once enabled, the voicemail will be sent to a configured email
address.
Email Address
Email address used to receive the voicemail or Fax.
Note:
please ensure that the section ―SMTP Settings For
Voicemail‖ (in the ―Voicemail Settings‖) have been properly
configured before using this feature.
Pickup Group
If this extension belongs to a pickup group, any calls that ring
this extension can be picked up by other extensions in the same
pickup group by dialing the Call Pickup feature code (the default
is *4).
Note:
*4 is the default setting, it can be changed under
Feature
Codes→ General → Call Pickup
.
Max Call Duration
Set up the max cull duration for every call of this extension, but
it’s only valid for outbound calls. Enter ―0‖ or leave this blank
empty, the value would be equal to the max call duration
configured in the Option Settings page.
Note:
this setting will not be valid for internal calls.
NAT
This setting should be used when the system is using a public IP
address to communicate with devices hidden behind a NAT
device (such as a broadband router). If you have one-way audio
problems, you usually have problems with your NAT
configuration or your firewall's support of SIP and/or RTP ports.
Qualify
Send check alive packets to IP phones.
Enable SRTP
Enable extension for SRTP (RTP Encryption).
Transport
This will be the transport method used by the extension. The
default is UDP.
UDP
TCP
TLS
DTMF Mode
Choose the DTMF mode:
RFC4733
Info
Inband
Auto.
Remote Register
Allow to register remote extensions.
If you enable ―Remote Register‖, the extension password must
include uppercase letters, lowercase letters, and digits.
