MyPBX U300 Administrator Guide
65
Voicemail
In this chapter, we introduce how to manage voicemail system on MyPBX U300,
including the following sections:
How to Change Voicemail Greetings?
Voicemail Settings
Users could configure voicemail settings, including general voicemail settings and
SMTP settings (which is used for
“Voicemail to Email”) via
PBX
→
Basic
Settings→Voicemail Settings
.
1) General Settings
Table 14-1 Voicemail- General Settings
General Voicemail Settings
Max Message per Folder
Set the maximum number of messages that can be
stored in a single voicemail box.
Max Message Time
Set the maximum length of a single voicemail
message.
Min Message Time
Set the minimum length of a single voicemail
message. Messages below this threshold will be
automatically deleted.
Ask Caller to Dial 5
If this option is set, the caller will be prompted to press
5 before leaving a message.
Delete Voicemail
After notification, the voicemail is deleted from the
server.
Operator Breakout from
Voicemail
If this option is set, the caller can jump out of the
voicemail and go to the destination you set by dialing
“0”.
Destination
The caller will go to the destination by dialing
“0”.
2) SMTP Settings
Please ensure the SMTP settings are configured correctly to make
Voicemail to
work properly.
After finishing the configuration, you can click on the
button
to check whether the setup is OK.
If the test is successful, you can use the email safely.