MyPBX U300 Administrator Guide
30
Variant
Set the SS7 variant value:
ITU
: international standard.
ANSI
: North American standard.
CHINA
: used in China.
Called NAI
SS7 Called Nature of Address Indicator:
Dynamic
National
International
Subscriber
Unknown
Default
Calling NAI
SS7 Calling Nature of Address Indicator:
Dynamic
National
International
Subscriber
Unknown
Default
Network Indicator
Set the network property of SS7.
National
National Spare
International
International Spare
Destination Point Code
Default point code that you would like to assign to
outgoing messages (in case of routing through STPs, or
using A links). The format follows the same rules as Point
Code.
Originating Point Code
Pointc code of the linkset. For ITU, this is the decimal
number format of the point code. For ANSI, this can either
be in decimal number format or in the xxx-xxx-xxx format.
Adjacent Point Code
Point code of node adjacent to this signaling link (Possibly
the STP between you and your destination). The format
follows the same rules as point code.
CRC
Enable or disable CRC.
Code
Set codec:
alaw
ulaw
Echo Cancellation
Enable or disable echo cancellation.
First CIC
An initial circuit number to this E1/T1/J1 matches both
parties. The value must be an integral multiples of 32 and
plus 1,e.g:1,33,65
…
CON
Enable or disable CON.
