Yeastar Technology MyPBX Standard Administrator'S Manual Download

Page: 97 / 123

MyPBX Standard Administrator Guide

traversingnetwork addresstranslators (NATs) and firewalls.

MyPBX supports OpenVPN, IPSec and L2TP.

Select one type of VPN and import VPN profile to MyPBX. If upload successfully, you
could check the network status under “Status”menu. If it shows disconnect you may
try reboot to take effect.

Figure 18-5 VPN Settings

Note:

for more details about the above VPN settings, please contact our technical

support.

DDNS Settings

Dynamic DNS or DDNS is a method of updating, in real time, a Domain NameSystem

(DNS) to point to a changing IP address on the Internet. This is used toprovide

apersistent domain name for a resource that may change location onthe

network.DDNS is usually configured on router. If your router cannot support DDNS,we

can set up DDNS on MyPBX.

MyPBX supports the following DDNS providers:



dyndns.org



freedns.afraid.org



www.no-ip.com



www.zoneedit.com



www.oray.com



3322.org

Figure 18-6 DDNS Settings

Summary of Contents for MyPBX Standard




























































































































Search results

Summary of Contents for MyPBX Standard

Reviews:

Related manuals for MyPBX Standard

Brands by name

Popular brands

Yeastar Technology MyPBX Standard, Administrator'S Manual

Search results

Summary of Contents for MyPBX Standard

Reviews:

Related manuals for MyPBX Standard

Brands by name

Popular brands