Yeastar Technology MyPBX Standard Administrator'S Manual Download

Page: 40 / 123

MyPBX Standard Administrator Guide

DOD

Direct Outward Dialing Number.

Associated Extension

The extension make call out via BRI Trunk will display the

associated DOD.



Add a DOD

Fill in DOD number and choose associated extension, then click

add one DOD number.



Add Bulk DOD

Click

to add DOD numbers in bulk.

Figure 6-6 Add Bulk DOD

Add bulk DOD for bulk extensions in ascending sequencewith the

“Begin DOD” you fill

in. For example, if the Associated Extensions are 100, 101, 102, 103, 104, 105 with
“Begin DOD” as 5500100, the corresponding DOD will be 5500100, 5500101,
5500102, 5500103, 5500104, and 5500105.

GSM/UMTS/CDMA Trunks

GSM/UMTS/CDMA trunks are supported in MyPBX Standard if you have got the

GSM/UMTS/CDMA module and SIM cards installed. One GSM/UMTS/CDMA trunk

supports only one SIM card for one concurrent call.

Click

to edit the GSM/UMTS/CDMA trunk.

Please check the GSM/UMTS/CDMA configuration parameters below.

Table 6-13 GSM/UMTS/CDMA Trunk Configurations

GSM/UMTS/CDMA

Trunk Name

Define the trunk name.

PIN Code

Enter the SIM card PIN code if the card has a PIN code.

Summary of Contents for MyPBX Standard




























































































































Search results

Summary of Contents for MyPBX Standard

Reviews:

Related manuals for MyPBX Standard

Brands by name

Popular brands

Yeastar Technology MyPBX Standard, Administrator'S Manual

Search results

Summary of Contents for MyPBX Standard

Reviews:

Related manuals for MyPBX Standard

Brands by name

Popular brands