Yeastar Technology MyPBX Enterprise User Manual Download

Page: 73 / 172

MyPBX Enterprise User Manual

www.yeastar.com

Page 73

Qualify

Send check alive packets to the sip provider.

DTMF mode

Set default mode for sending DTMF of this trunk. Default setting: rfc2833

DOD

DOD (Direct Outward Dialing) means the caller ID displayed when dialing out,
before configure this, please make sure the provider supports this feature

Associated Extension

The extension make call out via SIP Trunk will display the associated DOD

2)

Add IAX trunk

Input correct IAX information (provided by VOIP provider). Inaccurate
information will prevent the trunk from registering.

Figure 6-31

Type

IAX – Identifies whether the trunk sends and receives calls by using the VoIP
protocol IAX.

Summary of Contents for MyPBX Enterprise













































































































































































Search results

Summary of Contents for MyPBX Enterprise

Reviews:

Related manuals for MyPBX Enterprise

Brands by name

Popular brands

Yeastar Technology MyPBX Enterprise, User Manual

Search results

Summary of Contents for MyPBX Enterprise

Reviews:

Related manuals for MyPBX Enterprise

Brands by name

Popular brands