Yealink Zoom Rooms CP960-UVC, Deployment Manual

Page: 34 / 41

| Using the CP Wireless Expansion Mic CPW90 | 34
Registering the CPW90
To use the CPW90 as the external audio input device, you need to register the CPW90 first.
Procedure
1. Put the CPW90 on a charging cradle, the CPW90 starts up automatically.
2. Connect the micro USB port on the charging cradle to the USB port on the CP960 using a 0.3m USB cable.
The CPW90 enters the registration mode automatically. And the mute LED indicator on the CPW90 fast flashes
yellow.
3. Swipe down from the top of the screen to enter the device setting screen.
4.
Tap Settings > Basic Settings > MIC > .
5. Long press the mute key on the CPW90 for 5 seconds.
The CPW90 is registered with the CP960 conference phone automatically.
Unregistering the CPW90
When you no longer need the CPW90 as the external audio input device, you can unregister it.
Procedure
1. Swipe down from the top of the screen to enter the device setting screen.
2. Tap Settings > Basic Settings > MIC .
3. Select the desired microphone and then tap Detail .
4. Tap Unbind to deregister the CPW90.
Viewing CPW90 Information
When the CPW90 is registered with the IP phones, you can view CPW90 status on the phone.
Procedure
1. Swipe down from the top of the screen to enter the device setting screen.
2. Tap Settings > Basic Settings > MIC .
3. Tap Detail from the desired microphone block.