User Guide SIP-T42G IP Phone
86
3.
Press the
123
soft key to select the proper input mode and then enter the voice
mail access code (e.g., *97).
4.
Press the
Save
soft key to accept the change or the
Back
soft key to cancel.
Note
To listen to the voice mails:
1.
When the phone user interface prompts receiving new voice mails and the power
indicator LED slow flashes red, press or the
Connect
soft key to dial out the
access voice mail code.
2.
Follow the voice prompt to listen to the voice mails.
Note
To view the voicemail via phone user interface:
1.
Press
Menu
->
Message
->
Voice Mail
->
View Voicemail
.
The phone LCD screen displays the amount of the voice mails that includes new or
old voice mails.
2.
Select an account and then press the
Connect
soft key to listen to the voice mails.
Message Waiting Indicator (MWI)
The SIP-T42G IP phone supports MWI feature when receiving a new voice message. If
someone leaves you a voicemail, you will receive a message waiting indicator. MWI will
be indicated in three ways: a warning tone, the power indicator LED illuminates slow
flashing red and an indicator message (including a voice mail icon) appears on the
LCD screen. This is cleared only when you retrieve all voicemails or delete them.
For some particular servers, the MWI service is unsolicited. So the SIP-T42G IP phone just
need to handle the MWI messages sent from the server. But for some servers, the MWI
service is solicited. In this case, the SIP-T42G IP phone must enable the MWI Subscription
for MWI messages.
Note
The MWI Subscription parameters you need to know:
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.
MWI service is not available on all servers. Contact your system administrator for more
information
.
Before listening to the voicemails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the power indicator LED will stop flashing.
All manuals and user guides at all-guides.com
