Yealink VC110, User Manual

Page: 93 / 159

Using the VC110 Video Conferencing Endpoint
81
The VC110 video conferencing endpoint can be used to place calls, answer calls, or
conduct a conference cal. You can change layout, record videos or capture screenshots
during a call.
This chapter provides basic operating instructions for the VC110 video conferencing
endpoint. Topics include:

Placing Calls

Answering or Rejecting Calls

Call Management

Ending Calls
If you require additional information or assistance with your new phone, contact your
system administrator.
You can place a call in three ways using your VC110 video conferencing endpoint:

Using the remote control

Using the video conferencing phone

Via the web user interface
The VC110 video conferencing endpoint supports two call types:

Voice Call

Video Call
When you place a call, you can select the desired call type and bandwidth.
Note
You can search and dial a contact from the call history or local directory. For more
information, refer to
Local Directory on page 57 and Call History Management on page
66 .
The endpoint supports placing calls using contact numbers, SIP URI , IP address, H. 323
account or extension. SIP URI and IP addresses can be up to 32 characters. For example:
SIP URI:2210@sip.com, IP: 192.168.1.15.
For more information,
contact your system administrator.