Yealink Telkom W52P, Deployment Manual

Page: 12 / 15

Yealink DECT Phone System Deployment Guide
11
Example Deployment of North America DECT System
Note
Repeater can be deployed to extend the radio coverage of the base station to cover
areas where reception was previously not available. Handsets registered to the base
station can work normally in the extended coverage area. Before the deployment, you
need to learn the following:

Up to 6 repeaters can be registered to one base station to extend available
reception range for all registered handsets.

All repeaters must be installed within the base station coverage area.

It is not possible to install the repeaters in series or “daisy-chain”.

Repeater has the same radio coverage (up to 300m in unobstructed outdoor areas
and up to 50m inside buildings) as the base station.

Repeater does not increase the quantity of call paths. It shares the call paths with
the base station.

Adding a repeater is similar to adding a base station on the multi-cell system.
To ensure correct operation of the DECT system, we recommend that the distance
between base stations should be greater than 1.5m, and the distance between areas
should be greater than 60m.
Ensure that no signal from other areas is detected in one area. For example, the handset
in this area cannot search for a base station from other areas.
When adding a repeater in an area, the number of base stations should be reduced
accordingly.