Phone Network
45
802.1x Authentication
Yealink IP phones support the following protocols for 802.1X authentication:
EAP-MD5
EAP-TLS (requires Device and CA certificates, requires no password)
EAP-PEAP/MSCHAPv2 (requires CA certificates)
EAP-TTLS/EAP-MSCHAPv2 (requires CA certificates)
EAP-PEAP/GTC (requires CA certificates)
EAP-TTLS/EAP-GTC (requires CA certificates)
EAP-FAST (supports EAP In-Band provisioning, requires CA certificates if the provisioning method is
Authenticated Provisioning)
For more information on 802.1X authentication, refer to
Topic
802.1x Authentication Configuration
802.1x Authentication Configuration
The following table lists the parameters you can use to configure 802.1x authentication.
Parameter static.network.802_1x.mode
[1]
<y0000000000xx>.cfg
Description It configures the 802.1x authentication method.
Permitted
Values
0-EAP-None, 802.1x authentication is not required.
1-EAP-MD5
2-EAP-TLS
3-EAP-PEAP/MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
5-EAP-PEAP/GTC
6-EAP-TTLS/EAP-GTC
7-EAP-FAST
Default 0
Web UI Network->Advanced->802.1x->802.1x Mode
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->802.1x->802.1x Mode
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)
Summary of Contents for T48G
