Yealink T19P, User Manual

Page: 94 / 241

Yealink IP Phones Auto provisioning Guide
84
Parameter
Permitted
Values
Descriptions Web Setting Path
1-Disabled
The default value is 1.
transfer.blind_
tran_on_hook_
enable =
0 or 1
It enables or disables the phone to
complete the blind transfer through
on-hook.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer
->Blind Transfer On
Hook
transfer.on_ho
ok_trans_ena
ble =
0 or 1
It enables or disables the phone to
complete the attended transfer
through on-hook.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer
->Semi Attend
Transfer On Hook
transfer.dsske
y_deal_type =
0, 1 or 2
It configures the DSS key behavior
during an active call when user
presses the DSS key and the DSS key is
configured as a speed dial, transfer or
BLF/BLF list key.
0-New Call
1-Attended Transfer
2-Blind Transfer
The default value is 2.
Features->Transfer
->Transfer Mode
Via Dsskey
transfer.multi_
call_trans_ena
ble =
(not
applicable to
SIP-T20P and
SIP-T4X IP
phones)
0 or 1
It enables or disables the phone to
enter Transfer to menu during multiple
calls when pressing the transfer soft
key or TRAN key.
0-Disabled
1-Enabled
The default value is 1.
Features->General
Information->
Allow Trans Exist
Call
transfer.tran_o
thers_after_co
nf_enable =
0 or 1
It enables or disables the phone to
transfer call to the two parties after a
local conference call hangs up.
0-Disabled
1-Enabled
Features->Transfer
->Transfer on
Conference Hang
up