Yealink IP Phones Auto provisioning Guide
146
Parameter
Permitted
Values
Descriptions
Web Setting Path
call.
0-Disabled
1-Enabled
The default value is 0.
features.blf_le
d_mode =
(not
applicable to
SIP-T19P and
SIP-T48G IP
phones)
0, 1, 2 or 3
It configures BLF LED mode and
provides four kinds of definition for the
BLF/BLF list key LED status.
For more information, refer to
BLF LED
Mode
on page
228
.
The default value is 0.
Note: The old parameter
“features.blf_and_callpark_idle_led_e
nable” is also applicable to IP phones.
Features->General
Information->BLF
LED Mode
features.blf_lis
t_version =
0 or 1
It enables or disables the phone to
deal with the Version header in the BLF
NOTIFY message sent by the server.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after a reboot.
features.voice
_mail_tone_en
able =
0 or 1
It enables or disables the phone to
play the warning tone when receiving
a voice mail.
0-Disabled
1-Enabled
The default value is 1.
multicast.code
c =
(not
applicable to
SIP-T19P IP
phones)
PCMU
PCMA
G729
G722
G726-16
G726-24
G726-32
G726-40
G723_53
It configures the codec of multicast
paging.
Codecs G726-16, G726-24 and
G726-40 are not applicable to SIP-T21P
IP phones.
The default value is G722.
Features->General
Information->
Multicast Codec
Summary of Contents for T19P
