Yealink IP Phones Configuring Guide
62
3.
Enter the multicast IP address (for example: 224.5.6.20) in the
Address
field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
4.
Enter the multicast IP port number (for example: 10008) in the
Port
field.
5.
Repeat the step 2-4, you can add more paging groups.
6.
Click
Save changes
to accept the change.
7.
Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to
Configuring a Codec for Multicast Paging
To configure a default codec for multicast paging via web user interface:
1.
Click on
Paging Groups->Setting
.
2.
Select the desired codec from the
drop-down menu of
Outgoing Page Codec
.
The default codec is G722.
3.
Click
Save changes
to accept the change.
4.
Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to
Downloading Configuration Files
on page
Note
If G722 codec is used for multicast paging, the LCD screen will display the HD icon to indicate
that high definition voice is provided.
Summary of Contents for T19P-E2
Page 1: ......
Page 6: ...Yealink IP Phones Configuring Guide vi...
Page 12: ...Yealink IP Phones Configuring Guide 2...
Page 48: ...Yealink IP Phones Configuring Guide 38...
