Yealink IP Phone Configuration Guides
www.yeastar.com
Page 6
Configuring BLF on Yealink
Configuring BLF on the Yealink T26 and T28 Memory Keys (Optional)
Note:
1. The Yealink T22 and the Yealink T20 do not have Memory Keys and therefore do
not have BLF functionality.
2. Only PSTN and GSM trunk are allowed to be monitored currently in MyPBX
3. Please choose the right line number, make sure you have chosen the right one,
which is register to MyPBX
4. When configure it to monitor the status of trunk, we can press it to get a dial tone
before dialing out. Which is working for PSTN trunk only currently.
You can also manually configure the Yealink T26 and T28 Memory Keys to monitor
the status of other extensions or trunks on the system.
1.
Click on the "Phone" tab, and then select the "DSS Key" page.
2.
For each button you would like to configure, configure an extension to be
monitored by configuring the "DSS Key 1" row (for example) as follows:
Figure2-1
1)
Set the "Type" field to "BLF"
2)
Set the "Line" field to "Line 1" (Assume that account 1 is registered to
MyPBX)
3)
Set the "Value" field to the extension number or trunk name to be
monitored (for example 500 or pstn1)
4)
Set the "Extension" field to the dial sequence for picking up calls to the
