Yealink IP Phone Configuration Guides
www.yeastar.com
Page 15
Remark
: The factory default setting of DHCP for IP Phone is ―enable‖, so you can
skip this step to step 5.
If the DHCP is disabled, please follow below step to enable it. (e.g.: Yealink‘s IP
Phone).
1. Login IP phone‘s web page.
2. Enable DHCP.
Figure 3-12
Then IP phone will reboot twice to apply the configurations take effect, when done,
you can find the account 500 is registered in MyPBX‘s line status page and Yealink IP
phone‘s status page.
Step5.
Done
<Finish>
