compliant router or switch.
Connect the Ethernet cable between the Internet port on the phone and an available port on
■
the in-line power router or switch.
NOTE:
If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter.
Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.
Find the phone IP address
How to find your Yealink phone IP Address.
Pickup the handset and press OK button.
■
Press OK button to enter Status.
■
Press OK button to enter System Status.
■
The IP address will be displayed on the top of display.
Reset to factory settings
This step is not required for for brand new out-of-the-box phones, however, if the phone has
been already used then it is a must.
Pickup the handset and press OK button.
■
Go to Settings and press OK button.
■
Go to Systems Settings and press OK button.
■
Go to Base Restart and press OK button.
■
Enter PIN and press Done keysoft. Default factory PIN is 0000.
■
Registering phone
This chapter describes how to identify Yealink phone model, requirements that must be met and
how to register the phone using manual configuration or auto provisioning.
The following topics are covered:
Manual Configuration
■
Auto Provisioning
■
Manual Configuration
This chapter describes how to set UAD settings, create PBXware extension and register the
phone using Hostname or IP Address, or DNS SRV.
The following topics are covered:
UAD Settings
■
Creating Extension
■
