Yealink SIP-T58V User Manual Download Page 39

Page: 39 / 375

Getting Started

Navigating Menus and Fields

To navigate menus and fields, you can:



Tap corresponding keys on the touch screen.



Tap menu items, fields, and arrows on the touch screen.



Press keys on the phone keypad.

To operate your phone using gestures, follow these tips:

Gesture

Action

Tap

Touch an item on the screen with your finger, and then
lift your finger.

Long Tap

Touch an item for about 2 seconds without lifting your
finger from the screen till an action occurs.

Swipe

Touch and move. When you want to scroll quickly, swipe
your finger across the screen, either up, down, left or
right.

Drag

Touch and hold, then move. To stop scrolling, stop the
dragging motion.

Pinch Open

Touch the screen with two or more fingers, and then
move the fingers away from each other (stretch).

Pinch Close

Touch the screen with two or more fingers, and then
move the fingers towards each other (pinch).

Control Center/Notification Center

Control center or notification center allows you to access common features or view important
notifications quickly.

Summary of Contents for SIP-T58V
























































































































































































































































































































































































Search results

Summary of Contents for SIP-T58V

Reviews:

Related manuals for SIP-T58V

Brands by name

Popular brands

Yealink SIP-T58V, User Manual

Search results

Summary of Contents for SIP-T58V

Reviews:

Related manuals for SIP-T58V

Brands by name

Popular brands