Yealink SIP-T48S User Manual Download Page 73

Page: 73 / 159

Call Features

Call Features

The Yealink IP phone is designed to be easily used like a phone deployed on a public switched telephone network

(PSTN). You can place calls, answer calls, transfer a call to someone else, or conduct a conference call.

Topics

Switching Among the Handset, Speakerphone and Headset Modes

Changing the Default Account

Placing Calls

Answering Calls

Silencing or Rejecting Incoming Calls

Redirecting Incoming Calls

Switching Among the Handset, Speakerphone and Headset
Modes

You can select the desired mode before placing a call, or can alternate among Speakerphone, Headset, and Handset

modes during a call.

You can switch the audio output mode of a phone.

Switching to handset mode

Pick up the handset to switch to the handset mode.

Switching to speakerphone (hands-free) mode

Press the Speakerphone key to switch to the speakerphone (hands-free) mode. The LED indicator glows green when

the speakerphone is activated.

The SIP-T40P/T40G IP phone does not have key light.

Switching to headset mode

Press the HEADSET key to switch to the headset mode. The LED indicator glows green when the headset is activated.

The SIP-T40P/T40G IP phone does not have key light.

Note

Your system administrator can disable you to use handset, speakerphone (Hands-free) or headset mode.

Related Topics

Headset

Changing the Default Account

If there are multiple accounts registered on the phone, the phone will use the default account to dial out by default.

Summary of Contents for SIP-T48S
































































































































































Search results

Summary of Contents for SIP-T48S

Reviews:

Yealink SIP-T48S, User Manual, Page: 73 / 159

Search results

Summary of Contents for SIP-T48S

Reviews: