Yealink SIP-T48S User Manual Download Page 137

Page: 137 / 159

Optional Accessories with Your Phone

133

Optional Accessories with Your Phone

This section describes the optional accessories that you can use to extend your phone’s capabilities.

Topics

Supported Accessories

Headset

Bluetooth

Wireless Network

Expansion Module and Your Phone

Supported Accessories

You can use your phone with different types of accessories. The following optional accessories need to purchase sep-

arately if required for your particular phone:

Headset YHS32/YHS33

Wireless Headset Adapter EHS36

Bluetooth USB Dongle BT40

Wi-Fi USB Dongle WF40

Expansion Module EXP40

Check with your system administrator to find out which of these applications or accessories are available on your

phone.

Caution

We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessor-

ies may result in poor performance.

Headset

Yealink IP phone supports wired or wireless headset, USB headset and Bluetooth headset to place and answer calls.

You can connect an analog headset to all IP phones or connect a USB headset to the SIP-

T48S/T48G/T46S/T46G/T42S/T41S IP phones. You can also pair and connect a Bluetooth headset with your SIP-

T48S/T48G/T46S/T46G/T42S/T41S IP phone. On all IP phones, you can use a wireless headset adapter EHS36 to connect

an EHS-compatible wireless headset.

Note

Your system administrator can disable the headset feature. Check with your system administrator to find out if it is avail-

able on your phone.

Topics

Summary of Contents for SIP-T48S
































































































































































Search results

Summary of Contents for SIP-T48S

Reviews:

Yealink SIP-T48S, User Manual, Page: 137 / 159

Search results

Summary of Contents for SIP-T48S

Reviews: