Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
214
Parameter phone_setting.autop_led_flash_enable
<y0000000000xx>.cfg
Description
It enables or disables the power LED indicator to flash when the phone performs an auto pro-
visioning.
Permitted
Values
0-Disabled, auto provisioning does not change the LED status (that is, the original LED status will be
kept).
1-Enabled, during auto provisioning, the power LED indicator flashes at a fixed frequency.
Default
1
Supported
Devices
All phones except CP960
Bluetooth
You can pair and connect the Bluetooth-enable mobile phone with your phone, and make and receive mobile calls
on the IP phone. After connecting the Bluetooth-enabled mobile phone, you can synchronize the mobile contacts to
the IP phone.
For CP960 phones, you can also use your IP phone as a Bluetooth speaker for your mobile phone and set up a con-
ference among the calls on your IP phone, the PC and connected mobile phone.
For VP59/T58A phones, you can also connect the other Bluetooth devices (for example, Bluetooth headset) with
your phone. And you can transfer files via Bluetooth, sharing images/videos with other Bluetooth devices.
Topic
Bluetooth Configuration
You can activate or deactivate the Bluetooth mode, and personalize the Bluetooth device name for the IP phone.
The pre-configured Bluetooth device name will display in scanning list of other devices. It is helpful for the other
Bluetooth devices to identify and pair with your IP phone.
The following table lists the parameters you can use to configure Bluetooth.
Parameter static.bluetooth.function.enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the Bluetooth feature.
Permitted
Values
0-Disabled, you are not allowed to trigger Bluetooth mode to on.
1-Enabled
Default
1
Parameter features.bluetooth_enable
<y0000000000xx>.cfg
Description
It triggers the Bluetooth mode to on or off.
Note: It works only if “static.bluetooth.function.enable” is set to 1 (Enabled).
Permitted
Values
0-Off
1-On
Default
0
Web UI
Features > Bluetooth > Bluetooth Active
Phone UI
Settings > Basic Settings > Bluetooth > Bluetooth
Parameter features.bluetooth_adapter_name
<y0000000000xx>.cfg
Description It configures the Bluetooth device name.
Summary of Contents for One Talk CP960
Page 1: ......