![background image](http://html2.mh-extra.com/html/yealink/one-talk-cp960/one-talk-cp960_user-manual_3285659049.webp)
Getting Started
49
7.
Tap to accept the change or to cancel.
You can configure a static IPv6 address for the IP phone. Before configuring it, make sure that
the IP mode is configured as
IPv6
or
IPv4
&
IPv6
.
To configure a static IPv6 address via phone user interface:
1.
Tap
Settings
from the Home screen.
2.
Enter the admin password (default password: admin) from the
Advanced
block.
3.
Tap
Network
->
WAN
Port
->
IPv6
.
4.
Tap the
Type
field.
5.
Tap
Static IP
in the pop-up dialog box.
6.
Enter the desired value in the
IP Address
,
IPv6 IP Prefix
,
Gateway
,
Primary DNS
and
Secondary DNS
field respectively.
7.
Tap to accept the change or to cancel.
If you are using an xDSL modem for IPv4 network connection, you can connect your phone to
the Internet via PPPoE mode. Set the WAN port as a PPPoE port. The PPPoE port will perform a
PPP negotiation to obtain the IP address. Contact your system administrator for the PPPoE user
name and password.
To configure PPPoE via phone user interface:
1.
Tap
Settings
from the Home screen.
2.
Enter the admin password (default password: admin) from the
Advanced
block.
3.
Tap
Network
->
WAN
Port
->
IPv4
.
4.
Tap the
Type
field.
5.
Tap
PPPoE
in the pop-up dialog box.
Summary of Contents for One Talk CP960
