Yealink EXP40 User Manual Download Page 3 | Manualshive

Page: 3 / 58

background image

2. This device must accept any interference received, including interference that may cause undesired operation.

Class B Digital Device or Peripheral

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

WEEE Warning

To avoid the potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose
of WEEE as unsorted municipal waste and have to collect such WEEE separately.

Customer Feedback

We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and

comments to

[email protected]

«
1
2
3
4
5
...
»

Summary of Contents for EXP40



























































Reviews:

No comments

Related manuals for EXP40

Brand: Datasat Pages: 32

Brand: IEI Technology Pages: 19

Brand: IEI Technology Pages: 87

Brand: IEI Technology Pages: 3

Brand: Moxa Technologies Pages: 19

Brand: Supero Pages: 68

PCIe/PXIe-6301 Series

Brand: JYTEK Pages: 46

Brand: SeaLevel Pages: 34

Wireless Connectivity Cape

Brand: Element14 Pages: 2

Brand: Alarm Pages: 5

Disc Publisher XR

Brand: Primera Pages: 2

Brand: Dataprobe Pages: 16

Brand: H3C Pages: 68

Brand: Air Live Pages: 2

Brand: ZALMAN Pages: 12

Brand: CAMBRIONIX Pages: 43

C32C824151 - UB E02 Print Server

Brand: Epson Pages: 84

Brand: Epson Pages: 168

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands