Yealink EXP40, User Manual

Page: 17 / 58

Configuring the Yealink EXP40 Expansion Module
9

DND

ReCall

SMS

Record

URL Record

Multicast Paging

Group Listening

Private Hold

Hot Desking

ACD

Zero Touch

URL

Phone Lock

Retrieve Park

Directory
Note
Line
You can configure an Ext key as the line key. You can press this key to enter the pre-dialing
screen when the phone is idle. You can also press this key to place a new call during an active
call, and then the original call is placed on hold. For more information on using the line key, refer
to
Using the Line Key on page 44 .
To configure an Ext key as the line key:
1.
Click on
Dsskey
->
Ext Key
.
2.
In the desired Ext key field, select
Line
from the pull-down list of
Type
.
Quick access features like intercom and voice mail should be configured on your SIP server in
advance to make sure they will work on your phone. Contact your system administrator for more
information.
If more than one expansion module is connected, select the desired expansion module from the
pull-down list of
Expansion Key
.
Feature codes may vary between different servers.
The available key features may vary between different phone firmware versions. This guide
introduces key features available on the SIP-T48G IP phone running firmware version 72 or later,
the SIP-T46G IP phone running firmware version 71 or later and the SIP-T48S/T46S IP phones
running firmware version 81 or later.