Enterprise IP Phone Getting Started
User Name
User account information, provided by ISP.
Password
Account password provided by ISP.
SIP Server
SIP server address provided by ISP.
When you have finished the Network and Account Setting configuration, the Register
Status Icons will show in the idle screen:
Registered successfully
Register failed
Registering
When all accounts register fail, phone will display "No Service" by default.
When the phone reboot, it will register automatically. If many phones register at the
same time, this will affect the server, the users can set the register power up time so
that the phone will random register automatically within the set time.
Setting the power up time via web interface:
Choose Network->Advanced-> Registration random, enter the time in the field.
Note:
Should the IP PBX (SIP registrar) require an authentication, you will be prompted to
enter the correct password. Make sure you are using the appropriate input method or
enter the password via the web user interface.
Configuring via keypad
Network Settings:
Press Menu->Settings->Advanced Settings, enter the password,
and choose Network ->WAN Port /PC Port /VLAN/Webserver Type/802.1x Settings/VPN
Option to enter the internet relating configuration page.
Account Settings:
Press Menu->Settings->Advanced Settings, enter the password,
and choose Accounts to configure the account settings.
You can refer to the above “Configuring via Web Page” for the parameter details.