Regulatory Notices
Operating Ambient Temperatures
Contact the specified maintenance center for repair.
Operating temperature: +32 to 104°F (0 to 40°C) Do not insert any object into equipment slots that is not part of the
Relative humidity: 5% to 90%, noncondensing product or auxiliary product.
Storage temperature: -22 to +160°F (-30 to +70°C) Before connecting a cable, connect the grounding cable of the
Warranty
device first. Do not disconnect the grounding cable until you
Our product warranty is limited only to the unit itself, when disconnect all other cables.
used normally in accordance with the operating instructions
Cleaning Requirements
and the system environment. We are not liable for damage Before cleaning the device, disconnect it from the power supply.
or loss resulting from the use of this product, or for any claim Use a piece of soft, dry and anti-static cloth to clean the device.
from a third party. We are not liable for problems with Yealink Keep the power plug clean and dry.
device arising from the use of this product; we are not liable for
Troubleshooting
financial damages, lost profits, claims from third parties, etc., The unit cannot supply power to device other than Yealink device.
arising from the use of this product. There is a bad connection with the plug.
Explanation of the symbols
1. Clean the plug with a dry cloth.
DC symbol
2. Connect it to another wall outlet.
is the DC voltage symbol.
The usage environment is out of operating temperature range.
WEEE Warning symbol
1. Use in the operating temperature range.
To avoid the potential effects on the environment and The cable between the unit and the Yealink device is connected
human health as a result of the presence of hazardous incorrectly.
substances in electrical and electronic equipment, end 1. Connect the cable correctly.
users of electrical and electronic equipment should You cannot connect the cable properly.
understand the meaning of the crossed-out wheeled bin symbol. 1. You may have connected a wrong Yealink device.
Do not dispose of WEEE as unsorted municipal waste and have to 2. Use the correct power supply.
collect such WEEE separately. Some dust, etc., may be in the port.
Restriction of Hazardous Substances Directive (RoHS)
1. Clean the port.
This device complies with the requirements of the EU RoHS Contact your dealer or authorized service facility for any further
Directive. Statements of compliance can be obtained by contacting questions.
[email protected].
FCC Statement
Safety Instructions
This device complies with part 15 of the FCC Rules. Operation is
Save these instructions. Read these safety instructions before use!
subject to the following:(1) this device may not cause harmful
General Requirements
interference, and (2) this device must accept any interference,
Before you install and use the device, read the safety instructions received, including interference that may cause undesired operation.
carefully and observe the situation during operation. Any Changes or modifications not expressly approved by the party
During the process of storage, transportation, and operation, please responsible for compliance could void the user's authority to operate
always keep the device dry and clean, avoid collision and crash. the equipment.
Please attempt not to dismantle the device by yourself. In case of any
IC Statement
discrepancy, please contact the appointed maintenance center for repair. This device complies with Industry Canada’s licence-exempt RSSs.
Please refer to the relevant laws and statutes while using the device. Operation is subject to the following two conditions:
Legal rights of others should be respected as well. (1) this device may not cause interference; and
Environmental Requirements
(2) this device must accept any interference, including interference
Place the device at a well-ventilated place. Do not expose the device
that may cause undesired operation of the device. CAN ICES-3(B).
under direct sunlight. Le présent appareil est conforme aux CNR d’Industrie Canada
Keep the device dry and free of dusts. applicables aux appareils radio exempts de licence. L’exploitation est
Do not place the device on or near any inflammable or fire-vulnerable autorisée aux deux conditions suivantes :
object, such as rubber-made materials. (1) l’appareil ne doit pas produire de brouillage;
Keep the device away from any heat source or bare fire, such as a candle (2) l’utilisateur de l’appareil doit accepter tout brouillage
or an electric heater. radioélectrique subi, même si le brouillage est susceptible d’en
Operating Requirements
compromettre le fonctionnement.NMB-3(B).
Do not let a child operate the device without guidance.
Radiation Exposure Statement
Do not let a child play with the device or any accessory in case of accidental This equipment complies with FCC and IC radiation exposure limits
swallowing. set forth for an uncontrolled environment. This equipment should be
Please use the accessories provided or authorized by the manufacturer only. installed and operated with minimum distance 20cm between the
The power supply of the device shall meet the requirements of the input voltage radiator and your body.
of the device. Please use the provided surge protection power socket only. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même
Before plugging or unplugging any cable, make sure that your hands are temps qu'aucune autre antenne ou émetteur. Cet équipement
completely dry. devrait être installé et actionné avec une distance minimum de 20
Do not spill liquid of any kind on the product or use the equipment near water, centimètres entre le radiateur et votre corps.
for example, near a bathtub, washbowl, kitchen sink, wet basement or near a
Contact Information
swimming pool. YEALINK NETWORK TECHNOLOGY CO.,LTD.
During a thunderstorm, stop using the device and disconnect it from the power
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China
supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL)
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
twisted pair (the radio frequency cable) to avoid lightning strike.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
If the device is left unused for a rather long time, disconnect it from
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
the power supply and unplug the power plug.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
When there is smoke emitted from the device, or some abnormal
Made in China
noise or smell, disconnect the device from the power supply, and
unplug the power plug immediately.
