Yealink CP930W Telesystem User Manual Download Page 98

Page: 98 / 119

| Audio Settings |

Procedure

Go to

Menu

Settings

Advanced Settings (default PIN: 0000)

Softkey Label

Select the desired soft key.

Select the desired key type from the

Type

field.

Confirm the action.

Note:

If you replace another key of the

Menu

soft key on CP930W, you can access the phone

settings by pressing the

key. For DD phone, we recommend that you keep a

Menu

soft key;

otherwise, you may not access the phone settings.

Phone Mode

You can freely switch between Wi-Fi and DECT modes according to actual usage scenarios.

Note:

It is only applicable to CP935W.

Procedure

Tap

More

Basic

Phone Mode

Select the desired mode.

Confirm the action.

Audio Settings

You can change the basic audio settings on your phone.

•

Silent Mode

•

Adjusting the Volume

•

Setting the Ring Tone

•

Silent Charging

•

Setting the Advisory Tone

•

Setting the Vibrator

•

Disabling the Noise Cancellation

Silent Mode

You can enable the silent mode if you do not want to be disturbed. The handset will not ring when receiving
an incoming call, but it will still display the incoming call information.

It is only applicable to W73H/W78H/W56H/W53H/W59R/W57R.

•

Switching on Silent Mode

•

Switching off Silent Mode

Switching on Silent Mode

You can silence an incoming call by switching on silence mode to stop your phone from ringing.

Procedure

Long press the * key until the phone prompts “All Ring Tones Off”.

The silent icon

appears in the status bar.

Summary of Contents for CP930W Telesystem
























































































































Search results

Summary of Contents for CP930W Telesystem

Reviews:

Brands by name

Popular brands

Yealink CP930W Telesystem, User Manual

Search results

Summary of Contents for CP930W Telesystem

Reviews:

Brands by name

Popular brands