| Advanced Call Features |
23
3.
Select
Paging
.
Note:
Multicast RTP is the one-way paging only from the sender to the multicast address(es) (receiver).
For outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.
Receiving Multicast Paging
Your system administrator has set a listening paging group for you, you can automatically receive a paging call when
the phone is idle.
When there is a voice call or a paging call in progress, or when DND is activated on your phone, the phone handles
the new paging call differently according to the multicast listening settings configured by your system administrator.
Managing a Paging Call
During a paging call, you can manage it manually at any time.
You can do the following:
• Select
Hold
to place the current paging call on hold.
The paging call is placed on hold and the receiver releases the session.
• Select
Resume
to resume the held paging call.
The multicast RTP session is re-established.
• Select
End Call
to end the paging call.
Advanced Call Features
By using the advanced features, your handset would perform more functions that make your work more efficiently.
If you require additional information or assistance with your new phone, contact your system administrator.
Call Park and Call Retrieve
You can park a call, and then retrieve the call either from your phone or another phone. After parked, the call is placed
on hold, you can continue the conversation after retrieving it.
Note:
Call park is not available on all servers. Check with your system administrator to find out if it is
available on your phone.
Parking or Retrieving a Call in the FAC Mode
You can park the call to the local extension or the desired extension through dialing the park code.
Parking a Call in the FAC Mode
You can park a call in the FAC mode directly. When you park a call to the local extension or the desired extension, the
call is held in the same network on your phone.
Your system administrator has set call park in the FAC mode.
1.
During a call, .
The phone will dial the call park code which is pre-configured.
