www.ydlidar.com Copyright 2015-2019 EAI
10 /
12
After the adjustment is completed, click
the system will automatically save the
calibration parameters, and the calibration will take effect after saving.
(5)
Lock calibration function
After the calibration is saved, click
again to lock the function to prevent misoperation. these
controls will return to normal functionality after being locked.
FIRMWARE UPGRADE
Click System Settings and select Firmware, as shown in Figure 11. Click to get the latest
firmware. When there is a new version, the user can click on the control to perform a firmware
update on the Lidar.
Note:During the upgrade process,keep the Lidar power supply normal,communication
stable,network steady.Do not plug or unplug the Lidar serial port.
SOFTWARE UPGRADE
The client software will be version-changed and users can update to the latest version for a better
experience.
Click System Settings and select Update, as shown below:
FIGURE 13 SYSTEM UPDATE PAGE
