65
English
Drive chain adjustment
Should the visual inspection reveal an unacceptable amount of slack in your chain (it must be 1.5 in), it means that the
looser or tighter sections need to be adjusted. Please follow the instructions below to adjust accordingly.
REAR WHEEL
(A) Axle nut
(B) Lock nut
(C) Axle block
Chain slack adjustment
1.
Loosen the axle nut (A).
2.
Loosen the chain adjuster lock nuts (B) on both sides of
the swing arm with a wrench.
3.
Turn the chain-adjuster bolts (C) on both sides of the
swing arm clockwise an equal number of turns to
increase tension or counter-clockwise to decrease it.
4.
Tighten the chain adjuster lock nuts on both sides of the swing arm.
5.
Re-measure the chain slack.
Warning
.
Never ride your mini motorcycle when the drive chain is worn out or improperly adjusted. Failure to
consider this warning can lead to, among other things, the chain jumping off the sprockets or getting
caught on moving motorbike parts, with subsequent serious injury or even death.
B
A
C
