Device Manual
!
If this option is turned on, should the unit lose its pairing with a Bluetooth device then an automatic
alert will be sent
!
Geo-fence Alert
!
This alert type allows you to set your current position, then set a distance. Should the device leave
the pre-defined circular area, an automatic alert will be sent.
!
Collision Alert
!
This alert is somewhat experimental in nature, as a ‘collision’ can vary in force and strength, and so
every situation is different. This alert can be used to notify you of a given shock being applied to the
device. There is a ‘threshold’ and a ‘duration’ setting. The threshold sets how many G-forces will set
off the alert, and the duration sets how long that force needs to be constantly applied for, before the
alert is set.
!
At its lowest settings, the alert will detect a simple ‘tap’ on the device. At the highest settings, it will
not send an alert until a very strong impact is detected.
!
We suggest you experiment with the settings, if this is of interest, to find what works in your
particular situation.
!
!
Settings Menu
!
Screen idle
!
After a set number of seconds the screen will timeout to save battery. This option allows you to set
the number of seconds before this happens.
!
Screen lock
!
You must first enter the current PIN number for the device to access this menu. The default PIN is
1234. In this menu you can turn on/off the screen lock and set a PIN code to access the device. When
this option is turned on, you must enter a PIN code to be able to access the menu system.
!
A PIN code is entered digit by digit, by pressing UP/DOWN to choose the number, and OK to move to
the next digit.
!
GPS Wakeup time (Early Wakeup)
!
By default the unit will wake up 20 seconds before the automatic position reporting time, in order to
obtain a GPS fix before transmission. In challenging conditions, or where visibility of the sky is
limited, it may be required to increase this wakeup time to allow the GPS more time to get a fix.
!
Options range from 20 seconds to 3 minutes. By increasing this time, battery life will be decreased.
!
Screen brightness
!
By default the screen is set to 50% brightness. This option allows you to
change the screen brightness for better viewing in bright sunlight. Increasing
the brightness will decrease battery life.
!
Language
8