Yaw2 assembly
Written guide
I.
Design Leg Assembly
If you have a 3DOF simulator, then
Platform for this step, but if you have the 2DOF version, use the
Base Unit instead of the Rotation Platform here.
Step 1.: Mounting the design legs on the Rotation Platform
Turn the Rotation Platform upside down (if you have built in
be a flat bottom).
Mount the design legs on it. Carefully attach the LED panels on
both sides. Align the predrilled holes.
Step 2.: Tighten the legs with corresponding screws
Find the 4 x M6X16 cylindrical head screws. Take your electrical
screwdriver and screw in the screws on the side of the Rotation
Platform (behind the LED panel). Then turn the Rotation platform
over on its legs
