VIII. Connecting Flat Cable ports with the Upper Flat PCB
Step 25.: Remove the panel on the back of the Pitch Platform
screws. Remove the screws and take down the panel.
Step 26.: Place the Flat Cable carefully inside the panel
Be extra careful to not break the Flat Cable. Slide it gently under
the horizontal piece and upwards to the PCB.
Step 27.: Connect the Flat Cable Ports to the Upper Flat PCB
Ports are organized in the same pattern as the cable (see below):
Step 28.: Place the metal sheet that clamps the flat cable
Step 29.: Tighten the screws firmly on the metal sheet
Step 30.: Close the panel and fasten with screws
, now you can try your new Yaw2! Have fun! :)