Reject A Call
– press Answer/Hang-up button for 3 seconds; or press Fast Forward or SEEK+ button on
the stereo for 3 seconds.
Note: Pressing the radio Fast Forward or SEEK+ button may not be able to answer or hang up a call on
some cars.
To make a phone call:
I.
Dial a phone number on your phone.
II.
Once the phone is dialing, the music mutes and you start hearing the dialing tone. Once the call
is answered, you will start using it hands-free.
III.
Recalling
– Double-click the Answer/Hang-up button, it will call the last called number.
Note:
I.
If the car stereo is turned off or in a different mode (FM, XM, etc.), and you receive a phone call
or want to make a call, please turn on / switch to YATOUR Adapter playback mode, then
YT-BTM is ready for use.
II.
To make YT-BTM better working, please keep your phone within 6-8 meters (Obstacle-free
conditions). If your phone is taken out of the Bluetooth induction area, the Bluetooth connection
will automatically disconnect. When your phone is taken back, YT-BTM will automatically
connect to your phone on condition that YT-BTM keeps working.
III.
An incoming call will mute YATOUR Adapter playback and you will hear the incoming call tone
from radio speakers. When the call ends, YATOUR Adapter playback will automatically resume.
IV.
If you want to switch the call conversation from YT-BTM to your phone during a call, you can
operate it on your phone.
5. Voice Dialing
(Your phone must support Voice Dialing)
On the premise of successful pairing between YT-BTM and the phone, in the non-call status, press the
Answer/Hang-up button for 3 seconds, you will hear 2 beeps, implying that it enters into the Voice Dialing
status, meanwhile the phone will also give you a prompt sign, then you can make a call to someone in
your phone's contact list by using your normal voice command.
The recognition of YT-BTM Voice Dialing may be weaker than your phone Voice Dialing, due to the
microphone sensitivity and the surrounding conditions.
6. Streaming your music into stereo (A2DP)
On the premise of successful pairing between YT-BTM and the phone with A2DP function, enter the
phone’s music playback mode, stream the music on your phone to the car stereo via YT-BTM, then you
can listen to music streamed from your phone wirelessly. You can control Play / Pause by pressing the
Answer/Hang-up button.
