
Installation Instructions
On the premise of already-installed YATOUR Adapter, connect YT-BTM to YATOUR Adapter Bluetooth
slot, and connect the microphone to YT-BTM microphone slot, then amount the microphone in a proper
position. For better vocal effects, the microphone is suggested to be installed
near the driver
’s cab
,
such as A-pillar
upper part or on top of rearview mirror or headliner console.
, then organize the
cables to complete installation.
If you have bought the Remote Control Unit, you can amount YT-BTM in a concealed position but
should be accessible for the Remote Control Unit.
Function
YT-BTM will only work in the YATOUR Adapter mode. After installation of YT-BTM, turn on the car
stereo and switch to YATOUR Adapter playback mode, YT-BTM will be automatically searched and
connected to the last connected Bluetooth enabled mobile phone. Once the connection is successful,
YT-BTM LED indicator will keep lighting. If YT-BTM cannot be found by the last connected mobile phone,
it will be automatically redirected to the Pairing Status, this status keeps 3 minutes, YT-BTM LED
indicator is fast flashing within this 3-minute interval. After then it will be automatically redirected to the
non-Pairing Status, meanwhile YT-BTM LED indicator is slow flashing. In this non-Pairing Status,
YT-BTM will not be searched or recognized.
Note:
The mobile phone must be Bluetooth enabled.
Operation Instructions
1. Pairing Connection
I. After YT-BTM being powered on, it will automatically direct to the Bluetooth Pairing Status, meanwhile
YT-BTM LED indicator is fast flashing, this status keeps 3 minutes.
II. Within this 3-minute interval, activate your phone Bluetooth function, search a Bluetooth device named
“YATOUR”, and select it to pair with your phone. If your phone asks for a pin code, enter “0000”.
Be sure that Bluetooth function on your phone is active or turned on and that the phone is set to be
discoverable.
III. After successful connection, YT-BTM LED indicator will keep lighting, which indicates the pairing is
done and you can start using your phone hands-free.