YATO YT-85300, Original Instructions Manual

Page: 10 / 72

10
O R I G I N A L I N S T R U C T I O N S
GB
PRODUCT CHARACTERISTICS
The deep well pump is intended for pumping clean water from the deep bore wells. The pump is not designed to pump polluted
water, mechanically polluted water, and liquids other than water, such as: oils, petrol, solvents, acids, bases, organic substances,
fats, sewage, faecal matter, as well as water contaminated with such substances. The pumped water should also not contain
mechanical impurities or other abrasive particles.
Caution! The pump can be damaged as a result of stopping of the water fl ow through the pump!
The correct, reliable, and safe operation of the tool depends on its proper use, therefore:
Read the entire manual before the fi rst use of the device and keep it for further reference.
The supplier shall not be liable for any damage resulting from failure to comply with the safety instructions and recommendations
speci fi ed in this manual.
ACCESSORIES
The factory package contains a pump and an on/o ff switch junction box to which the pump’s power cord should be attached ac-
cording to the instructions given in the following part of this manual. The pump is not equipped with a discharge hose.
TECHNICAL PARAMETERS
Parameter Unit Value Value
Catalogue No. YT-85300 YT-85301
Rated voltage [V~] 230 230
Rated frequency [Hz] 50 50
Rated power [W] 370 550
Electrical protection class I I
IP protection class IP58 IP58
Maximum capacity [l/h] 5400 6000
Maximum pumping height [m] 35 50
Max. submersion depth [m] 80 80
Max. water temperature [ o C] 35 35
Water connector [‘’] 5/4 5/4
Max. diameter of mech. impurities [mm] 1.5 1.5
Dimensions (diameter x height) [mm] 78 x 955 78 x 1154
Net weight [kg] 10.4 12.4
Switch-on level [m] 10 10
Switch-o ff level [m] 2 2
Minimum well diameter [mm] 100 100
Lifting height [m]
Catalogue No. Catalogue No.
YT-85300 YT-85301
Capacity [l/h] Capacity [l/h]
0 5400 6000
20 5000 5500
40 4000 4500
60 3000 3500
80 2500 2500
100 2000 2000
120 1500 1500
105 1000 1000
120 - 200
Caution! The maximum pump capacity pertains to pumping clean water. To ensure maximum capacity, a hose with a diameter
corresponding to the water connector’s maximum diameter must be connected to the pump.