YATO YT-85230, Manual

Page: 14 / 108

14
EN
O R I G I N A L I N S T R U C T I O N S
PRODUCT OVERVIEW
The electric string trimmer is used for decorative lawn formation with a plastic string rotating at high speed. Thanks to the electric
drive, the trimmer is much quieter than a petrol one, and can also be used near buildings. Proper, reliable and safe operation of
the tool depends on appropriate use, that is why you should:
Read the entire instructions manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be held liable for any damage or injury resulting from improper use of the tool, failure to observe the safety
regulations and recommendations of this manual. Use of the tool for purposes other than those for which it was intended shall
cause the loss of the user’s rights to a warranty and statutory warranty.
PRODUCT EQUIPMENT
The product is supplied complete but requires assembly before fi rst use. The following are supplied with the product: a cutter
guard and a front handle
TECHNICAL DATA
Parameter Unit Value
Catalogue No. YT-85230
Rated voltage [V~] 230 - 240
Rated frequency [Hz] 50
Power [W] 250
Cutting speed [min
-1
] 12,500
Cutting width [mm] 220
String diameter [mm] 1.2
String length on the spool [m] 6
IEC protection class II
Weight [kg] 1.3
Noise level
- L
pA
(pressure) [dB] (A) 70.21 ± 0.88
- L
wA
(power) [dB] (A) 90.18 ± 0.88
Vibration (main handle/additional) handle [m/s 2 ] 1.853 ± 1.5 / 2.835 ± 1.5
Protection rating IPX0
SAFETY INSTRUCTIONS
IMPORTANT
READ CAREFULLY BEFORE USE
SAVE FOR FUTURE REFERENCE
Safe operating practices
Training
Read the instructions manual carefully. Familiarise yourself with the controls and the correct
use of the machine. Never allow children or persons not familiar with the instructions to use
the product. National regulations may restrict the operator’s age.
Remember that it is the operator or the user who is responsible for accidents of or hazards
to other people or the properties.
The machine can cause serious injuries. Please read the instruction manual carefully. Read
and understand the correct holding method, operation, maintenance, starting, and stopping
of the device. Familiarise yourself with the proper use of all the controls.