11
O R I G I N A L I N S T R U C T I O N S
GB
PROPERTIES OF THE TOOL
The drill and screwer is a universal portable tool which does not require external power supply for do-it-yourself enthusiasts
designed to drill holes in distinct materials (e.g. wood and wood-derived materials, metals) and to screw and unscrew bolts. Its
special advantages will be appreciated by DIY enthusiasts realising assembly and
fi
nishing jobs. The tool has been designed
solely for domestic work and must not be used professionally, i.e. in workshops and for remunerable jobs. A correct, reliable and
safe functioning of the electric tool depends on its proper use, so:
Before you proceed to operate the device, read the manual thoroughly and keep it.
The supplier will not be held responsible for any damage resulting from the safety regulations and the recommendations indicated
hereby not being observed.
EQUIPMENT
The device is supplied complete and does not require assembly.
TECHNICAL PARAMETERS
Parameter
Unit of measurements
Value
Catalogue number
YT-82060
Nominal voltage
[V]
~230
Nominal frequency
[Hz]
50
Nominal power
[W]
300
Nominal rotation
[min
-1
]
0 - 400 / 0 - 1450
Maximum hole diameter (steel)
[mm]
13
Maximum torque
[Nm]
40
Mass
[kg]
1,54
Level of noise
Acoustic pressure
[dB (A)]
83,1 ± 3,0
Acoustic power
[dB (A)]
94,1 ± 3,0
Class of insulation
II
Level of vibration
[m/s
2
]
3,32 ± 1,5
Grade of protection
IPX0
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and speci
fi
cations provided with this power tool.
Failure to do so may
result in electric shock,
fi
re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean.
Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing
fl
ammable liquids, gases
or vapors.
Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace.
Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools.
An unmodi
fi
ed plug that
fi
ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers.
Grounding the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture.
Water and moisture that gets inside the
power tool increases the risk of electric shock.
Do not overload the power cable. Do not use the power cord to carry, pull or unplug the power plug from the power outlet.
Avoid contact of the power cable with heat, oils, sharp edges and moving parts.
Damage or entanglement of the power cord
increases the risk of electric shock.
In the case of working outside closed rooms, use extension cords intended for work outside closed rooms.
The use of an
extension cord adapted for outdoor use reduces the risk of electric shock.
