YAT YT6702, Assembly Manual

Page: 53 / 57

52
EN
TROUBLE SHOOTING
This product is equipped with the sign for separate collection and sorting of waste electrical
and electronic equipment (WEEE). This means that when this type of product is processed and
dismantled, it must comply with the requirements of European Directive 2012/19/EU, to reduce
the negative impact on the environment. For more information, contact your local or regional
authorities.
Electronic products that have not been separately collected and sorted, may be dangerous for
the environment and human health due to the presence of harmful substances.
Problem Possible cause Solution
Product does not start Not connected to power supply Connect to power supply
Power cord or plug is defective Check by a specialist electrician
Other electrical defect to the product Check by a specialist electrician
Product does not reach full
power Extension cord not suitable for
operation with this product Use a proper extension cord
Power source (e.g. generator) has too
low voltage Connect to another power source
Air vents are blocked Clean the air vents
Poor result Cutting device is dull/damaged Replace with a new one
Scarified material exceeds capacity Only scarify materials according
to capacity of the product
Scarifying depth is incorrect Adjust depth