As many components of the
Control Panel
conform with the
system
control
of Windows
Ò
, most of the description is not necessary. The
description of the
control panel
components relevant for operating the
Touch Panel can be found in the following:
n
Set display
Via
‘Start
è
Settings
è
Control Panel
è
Display’
the dialog win-
dows for the display properties opens. Here you can change the
settings for the monitor options.
n
Calibrate touch screen
If the touch screen does not always react to a double click or not
precisely recognize the position of an entry, you can call the
dialog
Stylus
via
‘Start
è
Settings
è
Control Panel’
. In the reg-
ister
Double-Tap
you can use the grid pattern to preset a double
click velocity and test this on the symbol below. Click [OK] to
accept the value. The calibration of the touch screens is com-
pleted via the register
Calibration
by following the instructions.
n
Set Ethernet parameters
The dialog field for pre-setting an Ethernet address can be found
in
‘Start
è
Settings
è
Network and Dial-up Connections’
. The
default setting is address assignment via DHCP.
n
System properties (System)
Here you receive information about the version of the current Win-
dows
Ò
operating system, the memory load and sharing (altera-
tions here are not accepted into the registry) and the copyright.
The register
Device Name
allows you to change the device name
that is shown during Ethernet communication for instance.
Please note that changes are set back after PowerOFF-
PowerON. To store them permanently into the registry file
you have to store them explicitly. For this call ‘Start
è
Programs
è
KuK_Tools
è
KuK Tools’ [Store].
The dialog window where to configure the integrated MPI interface
can be found under
‘Start
è
Settings
è
Control Panel
è
MPI Configuration’
.
n
HSA
Here you set the highest MPI address (highest station address).
Within a MPI network the highest MPI address must be identical!
n
TS
With TS (this station) you set the local MPI address for the Touch
Panel.
System setting (Control
Panel)
Set MPI parameters
VIPA HMI
Deployment Touch Panel
Operating system Windows
Ò
Embedded CE 6.0 Prof. > Structure
HB160 | TP | 62I-JID0 | GB | 15-36
34