On the left side of the Touch Panel are the card slots for memory
cards. The cards are visibly covered by a security flap and are thus
secured from slipping out.
Please take care to pull the security flap back before plugging or
pulling a memory card like shown in the illustration and put it back
again afterwards. When plugging, the security flap additionally snaps
into position above the plugged memory card.
2.4 Dimensions
For the installation of the Touch Panel in control cabinets and desks
the following dimensions are necessary:
Front panel width
1.5 ... 6mm
Installation cutting (W x H)
250 x 175mm
Front panel (W x H)
264 x 189mm
Rear panel (W x H x D)
248 x 173 x 43mm
Installation depth
43mm
Security flap for
memory cards
Installation dimensions
8.4" - 62I-JID0-...
VIPA HMI
Hardware description
Dimensions
HB160 | TP | 62I-JID0 | GB | 15-36
14
