Installation and Operation Guide SOLECTRIA PVI 25TL-480-R
DOCR-071030-A (11/17/2020)
Page 6 of 101
1.3
General Safety Messages
DANGER
Electric Shock Hazard:
Components with hazardous voltage and energy will electrocute operator. Operator shall avoid
touching live components with hazardous voltage and energy.
WARNING
Unqualified Operator Hazard:
Operator may cause a hazardous situation by making incorrect installation or wiring
connections. A qualified technician shall do all installation and wiring connections to comply with all local, national, and
country specific guidelines for safety.
Electrical Shock Hazard:
Operator may contact components with hazardous voltage and energy. Use proper safety
equipment including Personal Protective Equipment (PPE) when de-energizing the unit. De-energize the unit, wait 5
minutes, and verify the absence of voltage before opening the equipment or removing any protective shields.
Heavy Lifting Hazard:
Solectria PVI 25TL-480-R inverters weigh ~22 kg (48.5 lbs). The wire-box weighs ~6 kg (13.2 lbs).
Ensure the mounting bracket is properly installed prior to hanging the inverter and wire-box on the bracket. A team of
two is recommended to lift and place the inverter and wire-box into position.
Chemicals Hazard:
This product can expose you to chemicals including lead, known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
NOTICE!
General Damage to Equipment:
Attempting to service the inverter improperly may result in damage. Contact Yaskawa
Solectria Solar Technical Support for maintenance.
Use as Intended:
Solectria PVI 25TL-480-R inverters are designed for PV grid-tied systems. The inverters are to be
installed with floating or ungrounded PV arrays only.
INFO
✔
Read and Follow Instructions:
Failure to read and follow instructions may void the warranty. Install the inverter
according to the instructions in this manual.
Grid Standard:
Please check with the local electric utility supply company before selecting a grid standard. If the inverter
is operated with an incorrect grid standard, the electric utility supply company may cancel the interconnection
agreement. Placing the inverter into operation before the overall system complies with the national codes, rules and
safety regulations of the application is not permitted.
