Page | 22
Enter the remaining “Device Information” exactly as it appears below for the default Robotiq 2F
configuration with a SMART Series controller. See the EtherNet/IP manual (specific to controller type)
for more information on these parameters.
NOTE: Before leaving this screen, press {Enter} to save the new configuration. A “Modify?”
dialog will appear. {YES} takes the user to a newly populated “Device Information List”.
Next, a Scanner for this device should be added and configured with the correct IP Address. Select
{SYSTEM} → {SETUP} → “Option Function”. Next, highlight “EtherNet/IP (CPU Board) : DETAIL” and press
{SELECT}. On the next screen, highlight “EtherNet/IP (CPU Board) : DETAIL” and press {SELECT} again.
This will open the primary EtherNet/IP configuration screen.