12 European Standards
52
YASKAWA ELECTRIC
TOBP C730600 96C YASKAWA AC Drive Option SI-ES3 Installation Manual
u
EMC Guidelines Compliance
This option is tested according to European standards EN 61800-3:2004/A1:2012 and
complies with EMC guidelines. The CE marking is declared based on the harmonized
standards.
n
EMC Guidelines Installation Conditions
Verify the following installation conditions to ensure that other devices and machinery used
in combination with this option and drives also comply with EMC guidelines:
1.
Use dedicated shield cable for the option and external device (encoder, I/O device,
master), or run the wiring through a metal conduit.
2.
Keep wiring as short as possible and ground the largest possible surface area of the
shield to the metal panel according to
Figure 21
.
Figure 25
Figure 20 Ground Area
A – Braided shield cable
C – Cable clamp (conductive)
B – Metal panel
C
B
A
GEM_EtherCAT_IM_E_conditional.book 52 ページ ２０１８年１０月２５日 木曜日 午後７時２９分
