background image

2.3.3  Memory management

n

2GB work memory

n

2GB SATA DOM user memory

n

USB storage media using "Host"-USB-A interface

n

Slot for CFast memory card

The Panel PC has a work memory with a size of 2GB. The work memory is not buffered

and is deleted after shut down.

As internal permanent storage medium the Panel PC has a 2GB flash module
(1600Mbyte for user data). After the start of Windows

Ò

 this memory is listed as 

Flashdisk

under 

My Device.

The Panel PC has got three USB-A interfaces (1x USB 3.0 and 2x USB 2.0). The con-

nection of USB sticks and USB drives are supported by the Panel PC.

At the back of the Panel PC there is a card slot for a memory card. At this slot you can

plug storage modules of the type CFast 2.0 - 600 MB/s (6GBit/s) - SATA protocol - not

hot-swap compatible.

Pin

Assignment

Pin

Assignment

S1

GND

PC6

n.c.

S2

S

PC7

GND

S3

SATA_TX1-

PC8

CFAST_LED1_C

S4

GND

PC9

CFAST_LED2_C

S5

S

PC10

n.c.

S6

SATA_RX1-

PC11

n.c.

S7

GND

PC12

n.c.

PC1

CFAST_CDI

PC13

VCC3

PC2

GND

PC14

VCC3

PC3

n.c.

PC15

GND

PC4

n.c.

PC16

GND

PC5

n.c.

PC17

CFAST_CDO

Prior to removing the CFast card, make sure the unit's power is off and

disconnected from the power supply.

Overview

Work memory

User memory

USB storage media

Slot for CFast

VIPA HMI

Hardware description

Structure > Memory management

HB160 | PPC | 67S-RRJ0 | en | 20-20

 

15

Summary of Contents for PPC021 EC






































































Reviews: