The next start-up takes place without requesting the log-in data.
The
‘Enhanced Write Filter’
is a tool which can be used to disable permanent writing
accesses to the internal drive "C:". It can be written to the drive but the data is not stored
permanently.
1.
Open the configuration window of the Enhanced Write Filter by clicking icon in
the system tray.
2.
In the next window click on [Configure].
3.
In the following window select
enable
under
‘Pending command’
to enable the
Enhanced Write Filter.
4.
Confirm with [Apply] and [OK].
5.
To disable the Enhanced Write Filters select
Commit and disable live
under
‘Pending command’
.
Please note that a status change of the Enhanced Write Filter will only
take effect after a restart of the system.
Enhanced Write Filter
HMI
Deployment Panel PC
Operating system Windows Embedded Standard 7 > Structure
HB160 | PPC | 67K-RSL0 | en | 22-20
36
Summary of Contents for PP010 ES
Page 1: ...PPC 67K RSL0 Manual HB160 PPC 67K RSL0 en 22 20 HMI Panel PC PPC010 ES...
Page 13: ...HMI Hardware description Structure Interfaces HB160 PPC 67K RSL0 en 22 20 13...
Page 70: ...Appendix HMI Appendix HB160 PPC 67K RSL0 en 22 20 70...
Page 71: ...Content A History of changes 72 HMI Appendix HB160 PPC 67K RSL0 en 22 20 71...