background image

Maintenance and inspection

9

 - 

77

Operating elements Rear side

Description sensor

The sensor comprises the following parts

Screw-fitted sensor tips

Adapter for screwing to the robot

LVDT sensor module

Application instruction

Avoid the following when using and storing the device:

Direct sunlight.

High humidity. Humidity must not condense.

Extreme ambient temperatures.

Large amounts of dust or other extremely dirty conditions.

Strong movements or vibrations.

Strong magnetic fields.

For cleaning use a clean and dry cloth. Never use liquids or aggressive cleaning agents.
The device must not be used in a potentially explosive environment.
The device can cause interferences to the reception of radio receivers, televisions or similar
devices. Ensure a sufficient distance to the devices.

Socket 6VDC:

Plug in the power supply.

CONFIG Key:

Without function (only for manufacturer’s device configura-
tion).

Socket RS232:

Plug in the cable specific to the programming pendant.

RoHS

6V DC

CONFIG

RS232

Material No. 157471

Summary of Contents for MH24





































































































Reviews: