YASKAWA MECHATROLINK-II, Installation Manual

Page: 37 / 46

7 Troubleshooting
YASKAWA ELECTRIC TOBP C730600 86F YASKAWA AC Drive Option SI-T3 Installation Manual 37
Keypad Display Fault Name
, oFA03,
oFA04
Option Card Error (CN5-A)
Option Card Error (CN5-A)
Cause Possible Solutions
A fault occurred in the
option.
1. De-energize the drive.
2. Make sure that the option is correctly connected to the connector.
3. If the problem continues, replace the option.
Keypad Display Fault Name
to
oFA30 to
oFA43
Option Card Connection Error (CN5-A)
Communication ID error.
Cause Possible Solution
The option card connection
to port CN5-A is faulty.
1. Turn off the power.
2. Check if the option is properly plugged into the option port.
3. Replace the option if the fault continues to occur.
Keypad Display Fault Name
oFb00
Option Fault (CN5-B)
Non-compatible option is connected.
Cause Possible Solution
The option card installed
into port CN5-A is
incompatible with the drive. Connect the option to the correct option port.
Note: Use connector CN5-B when connecting DO-A3, AO-A3, or two PG options.
Use connector CN5-C when connecting only one PG option.
Keypad Display Fault Name
oFb02
Option Fault (CN5-B)
Two identical options are connected at the same time.
Cause Possible Solution
An option of the same type
is already installed in option
port CN5-A, CN5-B, or
CN5-C.
Connect the option to the correct option port.
Keypad Display Fault Name
oFC00
Option Fault (CN5-C)
Non-compatible option is connected.
Cause Possible Solution
The option card installed
into port CN5-C is
incompatible with the drive. Connect the option to the correct option port.
Note: AI-A3, DI-A3, and communication options are not supported by option port
CN5-C.
TOBP_C730600_86F_7_0_E.fm 37 ページ ２０１８年１２月２０日 木曜日 午後６時１６分