22
YASKAWA
TOEP C720600 05B LCD Keypad Attachment Installation Manual
8.
Connect communication cables to an option connector.
Isolate communication cables from main circuit wiring and other electrical lines. Refer to
the instruction manual for each communication option for more information.
9.
Put the communication option LED label on the bracket.
A - Bracket
B - LED label
Figure 5.23 Put the LED Label on the Cover
10.
Install the bracket to the drive.
Push the bracket until the hooks click into place on the drive and use the supplied screw
B to safety the bracket.
Tighten the screws to a correct tightening torque:
• 4
×
12 tapping screw: 0.69 N
∙
m to 0.73 N
∙
m (6.11 in
∙
lb to 8.67 in
∙
lb)